Professional Installation
Convenient Service

Trailer Hitches
Bike Racks
Running Boards
Roof Rails

The Stealth tow package adds the controller, protected 4-way connector, safety-chain anchors, detachable ball mount, and required hardware to the hidden receiver. The wiring is integrated while the rear fascia is already removed for hitch access.

Connector Location: The 4-way connector is routed outside the vehicle and held at the hitch with its supplied magnetic holder; it is not stored loose inside the cargo area.

1. Protecting the Vehicle and Opening Rear Access

Rear lighting, cameras, sensors, and panel fit are documented before the taillights, lower trim, gravel guard, and fascia are removed.

2. Mounting the Tow Hardware

The safety-chain anchors and latch block are installed with the tow-kit hardware and torqued to the Stealth specification.

3. Installing the Controller and Signal Connections

The correct SHT25050 harness is installed, the control module is mounted securely, and vehicle lighting inputs are connected according to the Stealth instructions.

4. Routing Power and the 4-Way Connector

Power, ground, and trailer-output wiring are protected and supported. The 4-way connector is positioned at the hitch with its magnetic holder.

5. Reassembly and Complete Function Test

The fascia and trim are restored, then the trailer-light output and all affected vehicle cameras, sensors, and lights are tested.