Professional Installation
Convenient Service
Trailer Hitches
Bike Racks
Running Boards
Roof Rails
Ford Bronco Sport (2021–2024) Hitch Installation
Vehicle Coverage: 2021–2024 Ford Bronco Sport; exact trim, body configuration, and factory tow equipment are verified before scheduling
Receiver: Fixed 2-inch receiver
Hitch Rating: 3,500 lbs towing / 525 lbs tongue weight, subject to Ford's vehicle limits
Installation Time: Approximately 1.5–2 hours
The 2021–2024 Bronco Sport receiver fits beneath the rear body using enclosed-frame hardware. The exhaust is supported and lowered, the hardware is fishwired through the frame, and a measured fascia opening is made for the receiver.
1. Removing Lower Fascia Fasteners
The lower bumper screws are removed so the fascia can flex safely around the receiver during installation.
2. Supporting and Lowering the Exhaust
The exhaust is supported before rear hangers and required bracket hardware are released.
3. Fishwiring the Frame Hardware
Bolts and spacers are guided through the enclosed frame rails and retained while the hitch is raised.
4. Measuring the Receiver Clearance Opening
The lower bumper is marked from the manufacturer dimensions and trimmed only enough for the receiver to pass cleanly.
5. Torquing the Hitch and Restoring the Exhaust
All fasteners are tightened to specification before the exhaust and lower-fascia hardware are reinstalled.
Finished Appearance: The cross tube is tucked behind the bumper area; the centered receiver remains visible through a clean, measured lower-fascia opening.