Professional Installation
Convenient Service
Trailer Hitches
Bike Racks
Running Boards
Roof Rails
Ford Bronco Sport (2025–Present) Hitch Installation
Vehicle Coverage: 2025–Present Ford Bronco Sport; exact trim, body configuration, and factory tow equipment are verified before scheduling
Receiver: Fixed 2-inch receiver
Hitch Rating: 3,500 lbs towing / 525 lbs tongue weight, subject to Ford's vehicle limits
Installation Time: Approximately 2–3 hours
The current Bronco Sport installation requires removal of the rear lamps and bumper cover so the receiver can be secured behind the fascia at Ford’s structural mounting points.
1. Removing the Rear Lamps
The lamp covers, retaining nuts, and electrical plugs are released so both rear lamp assemblies can be removed without stressing painted edges.
2. Releasing the Lower Fascia and Wheel-Area Fasteners
Lower screws, push retainers, and wheel-opening attachments are organized before the bumper cover is unclipped.
3. Removing and Supporting the Bumper Cover
The fascia is released from both sides, supported, and moved clear without pulling parking-sensor or lighting wiring.
4. Installing the Receiver Structure
The hitch is aligned to the factory mounting points behind the bumper and secured with the specified structural hardware.
5. Restoring the Fascia and Verifying Clearance
The bumper cover, lamps, connectors, and retainers are restored before receiver alignment and panel gaps are checked.
Finished Appearance: The main hitch structure is concealed behind the bumper; only the centered 2-inch receiver and safety-chain loops remain visible below the fascia.