top of page

Hyundai Ioniq 5 (2022–Present) Stealth Hitch Installation

Hyundai Ioniq 5 with detachable Stealth Hitch receiver installed

Vehicle Coverage: 2022–Present Hyundai Ioniq 5 (2025+ excludes XRT)

Receiver: Detachable 2-inch

Maximum Towing Capacity: 3,500 lbs with the appropriate towing package

Maximum Tongue Weight: 350 lbs

Installation Time: Typically up to 2.5 hours

The Ioniq 5 Stealth Hitch is installed behind the rear bumper structure, where its detachable latch can remain completely out of sight when the receiver is removed. This is a bumper-off installation rather than a simple receiver bolted beneath the vehicle. Fitment for 2025 and newer vehicles excludes XRT models.

1. Removing the Rear Fascia and Lower Trim

The rear bumper cover and lower trim are released to expose the structural mounting area. Painted edges, clips, lighting connections, and sensor wiring are handled deliberately so the fascia can be removed without forcing the plastic or damaging its locating tabs.

2. Exposing the Factory Mounting Locations

With the fascia aside, the rear structure is opened far enough to reach the vehicle’s existing attachment points. The hitch is designed around those locations, so no holes are drilled through the vehicle frame.

3. Installing and Aligning the Hidden Hitch Beam

The hitch beam is raised behind the bumper, started at the factory mounting points, and aligned before the fasteners are tightened. Latch position is checked from the centerline of the vehicle so the removable receiver will engage cleanly without loading the lower trim.

4. Creating Concealed Latch Access

Where lower-panel clearance is required, the opening is made only in the concealed underside of the trim. The visible rear face remains unchanged, and the cut is checked against the latch and receiver before the bumper is reinstalled.

5. Reassembling the Fascia

The lower trim, bumper cover, electrical connections, and retained fasteners are restored in reverse order. Panel gaps and clip engagement are checked across both corners so the fascia returns to its original position.

6. Testing the Detachable Receiver

The receiver is inserted, locked, removed, and reinserted to confirm positive latch engagement and usable ground clearance. With it removed, the hitch hardware and receiver opening remain concealed behind the bumper.


Experienced installation that comes to you

Mobile Auto Outfitters brings experienced, licensed, and insured installation professionals directly to your home or workplace. We confirm the correct fit, complete the installation carefully, and make sure everything is ready to use—without a trip to a shop.

We’ve completed thousands of installations and perform more hitch and accessory installations annually than any shop in the region. We’re trusted by dozens of local dealerships, bike shops, and outdoor retailers.

Fully Hidden, Detachable Receiver. The 2-inch rack receiver locks into the concealed stainless-steel latch and removes when not in use. With the receiver removed, the hitch is hidden behind the bumper. Towing requires the appropriate tow conversion package and wiring.

Bumper-Off, No-Drill Installation. The rear fascia, lower trim, and impact beam are removed for access. The Stealth hitch beam mounts at existing vehicle attachment points without drilling. Required lower-panel trimming is hidden from normal view, then the bumper is reassembled and the latch mechanism is checked for secure operation.

Plan wiring with the hitch installation. Adding compatible wiring later is considerably more expensive on a Stealth hitch. The rear bumper must be removed again and the hitch modified to accept the wiring hardware, so much of the original hitch-installation work has to be repeated. If there is any chance you may tow in the future, install the wiring during the original hitch appointment.

Curt Champion Logo
Preferred Stealth Hitch Dealer Logo
2024 Best of the Upstate Nominee_edited.

As Seen On

Fox Carolina News
Image 8-9-24 at 5_edited_edited

Serving Upstate South Carolina:

Anderson • Boiling Springs • Clemson • Easley  • Fountain Inn • Gaffney • Greenville • Greenwood • Greer • Laurens • Mauldin • Simpsonville • Spartanburg • Taylors • Travelers Rest 

Serving Western North Carolina:

Arden • Asheville • Black Mountain • Brevard • Candler • Hendersonville • Waynesville • Weaverville • Woodfin

bottom of page