Professional Installation
Convenient Service
Trailer Hitches
Bike Racks
Running Boards
Roof Rails
Infiniti QX60 (2022–Present) Hitch Installation
Vehicle Coverage: 2022–Present Infiniti QX60; exact trim and tow-package fitment are verified before scheduling
Receiver: Fixed 2-inch receiver
Hitch Rating: 6,000 lbs towing / 900 lbs tongue weight, subject to the vehicle manufacturer's limits
Installation Time: Approximately 1.5–2 hours
The current QX60 uses the same underlying hitch mounting structure as the current Pathfinder. Installation requires lowering the spare tire and exhaust, plus a small underside fascia trim for the concealed-cross-tube receiver.
1. Lowering the Spare Tire
The spare is lowered and set aside so the receiver can reach the frame rails without contacting the tire or hoist cable.
2. Supporting and Lowering the Exhaust
The exhaust is supported before three rear hangers are released, protecting the pipes and joints while creating installation clearance.
3. Making the Hidden Fascia Trim
A measured section is removed from the underside center of the lower fascia; the opening is below normal sightlines and sized only for receiver clearance.
4. Raising and Centering the Hitch
Two installers lift the receiver into position and start all six structural bolts in the factory weldnuts before centering the opening.
5. Applying Final Torque
The mounting hardware is tightened in sequence and torqued to the manufacturer’s specification without drilling or welding the frame.
6. Restoring the Exhaust and Spare Tire
The exhaust hangers and spare tire are reinstalled, then the receiver, fascia, exhaust, and tire clearances are checked.
Finished Appearance: The cross tube remains behind the bumper so only the centered receiver and safety-chain loops are visible below the fascia. The installed-vehicle photo is shown using Fit so the full rear view remains visible without cropping.