Professional Installation
Convenient Service
Trailer Hitches
Bike Racks
Running Boards
Roof Rails
Nissan Rogue (2017–2020) Hitch Installation
Vehicle Coverage: 2017–2020 Nissan Rogue; exact trim and tow-package fitment are verified before scheduling
Receiver: Fixed 2-inch receiver
Hitch Rating: 3,500 lbs towing / 525 lbs tongue weight, subject to the vehicle manufacturer's limits
Installation Time: Approximately 1–1.5 hours
The 2017–2020 Rogue receiver mounts at five existing frame weldnuts. Installation includes removing the passenger-side tow bracket, lowering the exhaust for access, and removing underbody panels when present.
1. Removing Underbody Panels When Equipped
Lower covers that block the frame mounting area are released carefully and retained for the owner when they cannot be reused with the receiver.
2. Removing the Passenger-Side Tow Bracket
The factory tow hook or bracket occupies the hitch mounting points and is removed with its original hardware.
3. Supporting and Lowering the Exhaust
The exhaust is supported before the rear hangers are released, providing room to maneuver the receiver around the muffler.
4. Raising the Hitch to the Existing Weldnuts
The five mounting points are cleaned, the hitch is raised into place, and every structural bolt is started by hand before tightening.
5. Torquing and Restoring the Exhaust
The hardware is torqued in sequence, the exhaust is returned to its hangers, and clearance is checked around the muffler, fascia, and receiver.
Finished Appearance: The receiver and cross tube remain visible below the rear bumper, as shown in the installed-vehicle photo. The installed-vehicle photo is shown using Fit so the full rear view remains visible without cropping.